Keysight U1251B Guia Del Usuario página 58

2 Making Measurements
Percentage scale of 4 mA to 20 mA
Set up the multimeter to measure percentage scale as shown in
the test points and read the display.
– Press
NOTE
– The percentage scale for 4 mA to 20 mA or 0 mA to 20 mA is calculated using
– Press
The percentage scale for 4 mA to 20 mA or 0 mA to 20 mA is set to two ranges as
follows:
Table 2-2 Percentage scale and measurement range
Percentage scale (4 mA to 20 or 0 mA to 20 mA)
Always auto range
56
to select percentage scale display. Ensure that
shown on the display.
its corresponding DC mA measurement. The U1251B and U1252B will
automatically optimize the best resolution according to
to change the measurement range.
999.99%
9999.9%
DC mA auto or manual range
Keysight U1251B and U1252B User's and Service Guide
Figure
or
Table 2-2
50 mA, 500 mA
2-4. Probe
is
below.