Keysight U1251B Guia Del Usuario página 29

To adjust the meter to a hanging position follow the steps shown in
below.
1. Extend the tilt-stand until its maximum reach
4. Re-attach the tilt-stand to an upright position
Figure 1-3
Keysight U1251B and U1252B User's and Service Guide
Tilt-stand at hanging position
2. Detach the tilt-stand
3. Flip the tilt-stand over until this side
of the stand is facing the multimeter as
opposed to facing you
Getting Started
Figure 1-3
27
1