Keysight U1251B Guia Del Usuario página 63

Measuring Resistance, Conductance and Testing Continuity
Disconnect the circuit power and discharge all high-voltage capacitors
CAUTION
before measuring resistance to prevent any possible damage to the
multimeter or the device under test.
Set up the multimeter to measure resistance as shown in
the test points (by shunting the resistor) and read the display.
Figure 2-7
Keysight U1251B and U1252B User's and Service Guide
Measuring resistance
Making Measurements
Figure
Black Lead
Red Lead
2
2-7. Then probe
61