Troubleshooting; Disposal - Emerson Tescom WegaMed Instrucciones De Uso

Please also refer to the corresponding section in our terms of delivery on the delivery
note.
You will find the manufacturer's address on the last page of these instructions for use.
Please contact our repairs department before returning any goods for repair or any faulty
goods. In the interests of our staff we also require a declaration indicating whether – and
if so which – harmful substances have been used with the appliance and which measures
(e.g. rinsing) have been taken so that we can exclude any hazards during repair.
6.5

Troubleshooting

Problem
Connection between
cylinder valve and pressure
regulator is not leak-tight.
Outlet pressure rising,
pressure relief valve
blowing off.
Leaking around spring cap.
Unusually high gas
consumption.
Flow decreases over the
duration.
Flow outlet does not close.
Flow outlet cannot be
adjusted.
6.6

Disposal

Please contact an approved and certified disposal company to ensure the proper
disposal of the pressure regulator once it has reached the end of its service life. Your
environmental protection representative or municipal authorities will be able to provide
the relevant contact details. Pay attention to local, regional or domestic regulations and
legislation.
Cause
Damaged gasket.
Soiled or damaged
valve seat.
Faulty diaphragm.
System leaking.
Blocked inlet filter.
Damaged flow outlet.
Damaged flow outlet.
63
Solution
Replace gasket.
Must be repaired by TESCOM
EUROPE or an authorised
specialist dealer.
Must be repaired by TESCOM
EUROPE or an authorised
specialist dealer.
Find and fix the leak. If the
pressure regulator is leaking, it
must be repaired by TESCOM
EUROPE or an authorised
specialist dealer.
Must be repaired by TESCOM
EUROPE or an authorised
specialist dealer.
Must be repaired by TESCOM
EUROPE or an authorised
specialist dealer.
Must be repaired by TESCOM
EUROPE or an authorised
specialist dealer.
en