Oster BVSTEM7300 Manual De Instrucciones página 46

BEFORE FIRST USE OF THE ESPRESSO MACHINE
TOP BURR
Step 1. Remove Packaging
- Ensure all packaging has been removed.
GRINDER
COLLAR
Important: Remove the red plug found at the
base of the Water Reservoir.
Step 2. Position Machine
- Ensure the machine is positioned onto a dry,
stable, flat & horizontal benchtop.
Step 3. Wash & Dry Parts
GRINDER
- Wash the parts listed below in warm water
with a mild detergent:
MANUAL SHOT
Stainless Steel Milk Jug
Stainless Steel One Cup Filter Basket
Stainless Steel Two Cup Filter Basket
Hardened Stainless Steel Top Burr
Water Reservoir
1. ALIGN
Group Handle
& INSERT
Bean Hopper
HOPPER
Tamper
GUIDE
- Rinse & allow thorough air drying.
Step 4. Place Accessories
GRINDER
- Accessories Storage Home behind the Drip
INTERLOCK GRINDER
Tray for the Cleaning Brush & Cleaning Pin.
On the left is storage space for nesting One
GRINDER
& Two Cup Filter Baskets.
- Insert the Grind Bin in the space provided
on the left side of the Drip Tray.
MUEVA EL CAFÉ
- Place the Tamper in the detail provided on
the Warming Plate.
BVSTEM7300-054_19ESM4 (LA).indd 7
BARISTA MAX
CLEAN
2.TURN
3.HOPPER GATES OPEN
BARISTA MAX
MANUAL SHOT
CLEAN
BARISTA MAX
MANUAL SHOT
CLEAN
PLEASE EMPTY TRAY
MAX
2.8 L
Step 5. Insert Parts into the Grinder
• Removable Top Burr
1 L
- Using the two handles insert the Top Burr
into the Grinder Collar.
MIN
- The arrows on the Top Burr should align to
arrows on the Grinder Collar.
- When correctly seated, the Top Burr will be
flush with the surface of the Grinder Collar.
TOP BURR
GRINDER
1. ALIGN
COLLAR
& INSERT
- Place handles flat, one on each side.
TOP BURR
GRINDER
• Removable Bean Hopper
1. Align the Hopper Guide with the red
GRINDER
COLLAR
Grinder Interlock.
a) Insert Bean Hopper into the Grinder Collar.
2. Lightly pushing down, turn the Bean
Hopper in a clockwise direction to lock the
Hopper into place.
1. ALIGN
3. This opens the Hopper Gates (to release
GRINDER
& INSERT
coffee beans onto the Burrs). At Grind
HOPPER
MANUAL SHOT
Setting 30, Hopper Gates are fully open.
GUIDE
GRINDER
INTERLOCK GRINDER
1. ALIGN
& INSERT
GRINDER
HOPPER
GUIDE
GRINDER
MOLINILLO
INTERLOCK GRINDER
- Continue to turn the Bean Hopper in a
GRINDER
clockwise direction to set the Grind Setting.
- As a starting point for espresso extraction try
ENCENDIDO/ COLADO
MANUAL SHOT
APAGADO MANUAL
Grind Setting 20.
(Further Grind Setting adjustment might be
MUEVA EL CAFÉ
required, see information on pages 13-14).
- Fill the Bean Hopper with freshly roasted
coffee beans.
English - 7
MUEVA EL CAFÉ
MAX
2.8 L
1 L
MIN
2.TURN
3. CENTER
BARISTA MAX
MANUAL SHOT
CLEAN
2.TURN
BARISTA MAX
CLEAN
3.HOPPER GATES OPEN
2.TURN
BARISTA MAX
MANUAL SHOT
CLEAN
BARISTA MAX
MANUAL SHOT 3.HOPPER GATES OPEN
CLEAN
READY
BARISTA MAX
MANUAL SHOT
CLEAN
BARISTA MAX
CLEAN
PLEASE EMPTY TRAY
PLEASE EMPTY TRAY
M
MAX
2.8 L
1 L
1. ALI
MIN
& INS
1. ALIGN
& INSERT
M
ENCENDI
APAGAD
MOLINILL
6/26/19 09:33