Oster BVSTEM7300 Manual De Instrucciones página 66

Cleaning & Unblocking Grinder Burrs,
Collar, Grind Chamber and Outlet
• 1-2 Months
If the Grinder is used frequently (everyday),
TURN
the Burrs need to be cleaned to ensure
best performance of the integrated Grinder.
Regular cleaning helps the Burrs achieve
consistent grinding results, which is especially
important when grinding coffee beans for
PRESIONAR Y MANTENER
espresso.
GRINDER
OUTLET
• Grind Off Excess Coffee Beans
- The machine is on and in the READY state.
- Make note of the current Grind Setting
(to use as the starting point after cleaning).
- Insert Two Cup Filter Basket into the Group
Handle.
- Insert Group Handle into Grinding Cradle.
GRINDER
OUTLET
-15g
MOLINILLO
PRESIONAR Y MANTENER
- Turn Bean Hopper fully anti-clockwise to
close the Hopper Gates and unlock the
ONE CUP
Bean Hopper. The Bean Hopper will pop up
slightly.
- Place your hand on top of the Bean Hopper
and push down lightly.
At the same time push down the Group
TURN
Handle to activate the Grinder. Continue
grinding until no more coffee grinds are
emitted from the Grinder.
PRESS & HOLD 4 SEC
TURN
COLADO MANUAL
PRESS & HOLD 4 SEC
MOLINILLO
PRESIONAR Y MANTENER
ER 4 SEC
BVSTEM7300-054_19ESM4 (LA).indd 27
CARE & CLEANING - GRINDER
PUSH DOWN
AT THE SAME TIME
MOLINILLO
MOLINILLO
PRESIONAR Y MANTENER
GRINDER
S
PUSH DOWN GROUP HANDLE
OUTLET
MOLINILLO
TWO CUP
PRESIONAR Y MANTENER
20-22g
TWO CUP
OR
PUSH DOWN
TURN
AT THE SAME TIME
PUSH DOWN
S
PUSH DOWN GROUP HANDLE
AT THE SAME TIME
COLADO MANUAL
PUSH DOWN GROUP HANDLE
MOLINILLO
PRESIONAR Y MANTENER
ALIGN HOPPER GUIDE
- Remove the Group Handle and dispose of
the waste grinds as these will be too coarse
for espresso coffee.
HOPPER
- Remove the Bean Hopper from the Grinder
GUIDE
Collar and store any remaining coffee beans
in an airtight container to preserve their
freshness.
2.REMOVE
REMOVE
GRINDER
1.TURN
• Preparing to Clean
- Turn off the machine, switch off & unplug at
CLEAR OF
COFFEE BEANS
power outlet.
& GRINDS
CAUTION: Care should be taken when cleaning
Grinder Burrs as they are sharp.
• Cleaning Top Burr
1.TURN
- Fold the two handles up and lift the Top Burr
from the Grinder Collar.
- Wash the Top Burr in warm soapy water with
a mild detergent, rinse & dry.
ALIGN HOPPER GUIDE
Note: Spots & marks on the surface of the
CLEAR OF
Burrs are part of the hardening process (for COFFEE BEANS
& GRINDS
extra-long life). These marks do not affect the
PUSH DOWN
performance of the Grinder or the taste of the
HOPPER
espresso.
GUIDE TURN
• Cleaning & Unblocking Bottom Burr and
Grind Chamber
AT THE SAME TIME
- Use the Cleaning Brush or a Vacuum
Cleaner to thoroughly clear the parts and
ALIGN HOPPER GUIDE
REMOVE
surfaces in the Grind Chamber of fine coffee
grinds. A damp cloth can be used to wipe the
inside of the Grind Collar.
HOPPER
- Allow thorough air drying.
GUIDE
S
PUSH DOWN GROUP HANDLE
REMOVE
TOP COVER
S
GRINDER
COLLAR
English - 27
1. ALIGN & INSERT
2.TURN
MOLINILLO
PRESIONAR Y MANTENER
2.REMOVE
OUTLET
1.TURN
CONTAINER
CLEAR OF
2.REMOVE
TOP COVER
COFFEE BEANS
& GRINDS
GRINDER
COLLAR
GRINDER
1. ALIGN & INSERT
ALIGN HOPPER GUIDE
GRINDER
MANUAL SHOT
HOPPER
2.TURN
GUIDE
1. ALIGN & INSERT
REMOVE
2.TURN
TOP COVER
GRINDER
COLLAR
MOLINILLO
PRESIONAR Y MANTENER
TOP COVER
GRINDER
GRINDER
BARISTA MAX
COLLAR
AIR TIGHT
AIR TIGHT
CONTAINER
AIR TIGHT
CONTAINER
BARISTA MAX
1. ALIGN & INSERT
PUSH DOWN
BARISTA MAX
2.TURN
AT THE SAME TIME
S
PUSH DOWN GROUP HANDLE
GRINDER
BARISTA MAX
6/26/19 09:34
GRINDER