Publicidad
Idiomas disponibles
Idiomas disponibles
FR
7. Maintenance
ES
PT
IT
parts. They contain chemicals that can damage, weaken or destroy the
housing, thus compromising the integrity of the double insulation.
PL
UA
a) Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that they are properly tight-
RO
ened. Should any of the screws be loose, tighten them immediately. Failure to do
so could result in serious injuries.
GR
b) Maintenance of the motor
The motor unit winding is the very "heart" of the power tool. Exercise due care to
EN
ensure the winding does not become damaged and/or wet with oil or water.
c) Inspection the carbon brushes
The motor employs carbon brushes which are consumable parts. Since an exces-
sively worn carbon brush could result in motor trouble, replace the carbon brush
with an identical part when it becomes worn to or near the limit. In addition,
always keep carbon brushes clean and ensure that they slide freely with in the
brush holder.
d) Maintenance the supply cord
This supply cord is type X attachment, method of attachment of the supply cord
such that any replacement is intended to be made by the manufacturer, its service
If a set of spare carton brush is included in this package for replacement purposes.
service technician using identical parts to ensure the integrity of double insula-
tion. To assure the safety of our customers, we strongly recommend against the
consumers checking and changing the brushes.
Under normal usage, the carbon brushes will last beyond the 90 day warranty
period. Therefore, do not open the body housing within 90 days of purchase to
inspect the brushes or the manufacturer warranty will void at that time, please see
warranty section if a return is necessary.
WARNING
products penetrating oils, etc. Come in contact with plastic
147
Publicidad
