Publicidad
Idiomas disponibles
Idiomas disponibles
OMNIA M 3.2
If you only set WATER FLOW TEMP, to YES, or only set ROOM TEMP, to YES, The following pages will be displayed.
only WATER FLOW TEMP. YES
If you set WATER FLOW TEMP, and ROOM TEMP, to YES, meanwhile set DOUBLE ZONE to NON or YES, the following
pages will be displayed.
In this case, the setting value of zone 1 is T1S,the setting value of zone 2 is TS (The corresponding TIS2 is calculated
according to the climate related curves.)
If you set DOUBLE ZONE to YES and set ROOM TEMP, to NON, meanwhile set WATER FLOW TEMP, to YES or NON,the
following pages will be displayed.
In this case, the setting value of zone 1 is T1S,the setting value of zone 2 is T1S2.
If you set DOUBLE ZONE and ROOM TEMP, to YES, meanwhile set WATER FLOW TEMP, to YES or NON,the following
page will be displayed.
In this case, the setting value of zone 1 is T1S,the setting value of zone 1 is TS (The corresponding TIS2 is calculated
according to the climate related curves.)
10.7.6 ROOM THERMOSTAT
About ROOM THERMOSTAT
The ROOM THERMOSTAT is used to set whether the room
thermostat is available.
How to set the ROOM THERMOSTAT
Go to
> FOR SERVICEMAN> 6.ROOM THERMOSTAT.
Press
. The following page will be displayed:
22T÷30T
Homepage (zone 1)
Addition page (zone 2) (Double zone is effective)
Homepage (zone 1)
Homepage (zone 1)
Addition page (zone 2) (Double zone is effective)
Cod. 3QE47660 - Rev. 00 - 02/2022
only ROOM TEMP. YES
Addition page (zone 2)
129
EN
Publicidad
