Publicidad
Idiomas disponibles
Idiomas disponibles
The AUTO RESTART function reapplies the user interface
settings at the time of the power supply failure. If this function
is disabled, when power returns after a power supply failure,
the unit won't auto restart.
10.7.14 POWER INPUT LIMITATION
How to set the POWER INPUT LIMITATION
Go to
> FOR SERVICEMAN> 14. POWER INPUT
LIMITATION
10.7.15 INPUT DEFINE
How to set the INPUT DEFINE
Go to
> FOR SERVICEMAN> 15.INPUT DEFINE
15.12 DFT1/DFT2
134
EN
10.7.16 CASCADE SET
How to set the CASCADE SET
Go to
After setting the address, you need to press the "UNLOCK"
key to confirm.
The address "FF" is an invalid address code.
10.7.17 HMI ADDRESS SET
How to set the HMI ADDRESS SET
Go to
When HMI SET is set to SLAVE, the controller can only
switch the operation mode, turn on or off, set the temperate,
and cannot set other paramters and functions.
The address "FF" is an invalid address code.
DEFROST
Cod. 3QE47660 - Rev. 00 - 02/2022
OMNIA M 3.2
> FOR SERVICEMAN>16. CASCADE SET
> FOR SERVICEMAN> 17. HMI ADDRESS SET
STOP BIT
22T÷30T
1
1
Publicidad
