Ferroli OMNIA M 3.2 22T Manual De Instalación Y Del Propietario página 133

OMNIA M 3.2
During preheating for floor, all the buttons except
invalid. If you want to turn off the preheating for floor, please
press .
The following page will be displayed:
Use ◄ ► to scroll the cursor to YES and press
preheating for floor will turn off.
The operation of the unit during preheating for floor
described in the picture below:
Pump
Compressor
If FLOOR DRYING UP is selected, after press
following pages will be displayed:
When the cursor is on OPERATE PREHEATING FOR
FLOOR, Use ◄ ► to scroll to YES and press
following page will be displayed:
22T÷30T
are
, the
, the
. The
Cod. 3QE47660 - Rev. 00 - 02/2022
During floor drying, all the buttons except
When the heat pump malfunctions, the floor drying mode
will turn off when the backup heater and additional heating
source is unavailable. If you want to turn off floor drying up,
please press . The following page will be displayed:
Use ◄ ► to scroll the cursor to YES and press
drying will turn off.
The target outlet water temperature during floor drying up
described in the picture below:
10.7.13 AUTO RESTART
The AUTO RESTART function is used to select whether the
unit reapplies the user interface settings at the time when
power returns after a power supply failure.
Go to > FOR SERVICEMANS>13. AUTO RESTART
are invalid.
. Floor
133
EN