Balluff BIR 01- K15SL -000S15 Serie Manual De Instrucciones página 50

BIR 01- _ _ _ _ -K15SL _-000S15
Inductive Rapid Positioning System
10
Technical data (continued)
10.8 Connection to the evaluation unit
The maximum SSI clock frequency f
the cable length :
1)
f in kHz
Clk,max
For longer length: required cable cross-section ≥ 0.6 mm
1)
Fig. 10-1: Maximum SSI clock frequency depending on the cable length
10.9 Approvals and markings
The inductive rapid positioning system
BIR is restricted for use in industrial
machinery applications as defined in the
Electrical Standard for Industrial
Machinery, NFPA 79.
The CE Mark verifies that our products
meet the requirements of the current EU
Directive.
Additional information on directives, approvals
and standards can be found at
www.balluff.com on the product page.
22 english
is dependent on
CLK, max
or ≤ AWG19
2
Cable length in m