Zizito BROOKLIN Manual De Instrucciones página 3

STATEMENT:
The following parts are designed to prevent damage to the packing box of the parts protruding from the
bicycle, and to protect the packing parts. After receiving the goods, the packing parts can be discarded.
Indications: Because the packing parts do not affect the use of the bicycle, the damage or missing of the
packing parts can not be the reason to refuse to sign the goods or ask for any replacement.
WARNING: Never inflate your tires to a pressure greater than the maximum allowable on the sidewall
of the tires. Exceeding the manufacturer's maximum pressure can cause the tire to come out of the rim,
which can damage the wheel and injure the cyclist and people standing nearby.
INSTALLATION SCHEME OF THE MOUNTAIN BIKE
1.
1. Due to transportation, the front set stem is placed inward "not installed upside down".
2. Loosen the 3 bolts on the kickstand and on the side of the stand and rotate the stand 180 degrees.
3. Rotate the forward set stem towards the front fork and then tighten the hex bolts.
4. Loosen the 4 bolts at the front of the fork, and place the handlebar on it, then tighten the bolts.
WARNING: Failure to maintain, inspect, and properly adjust your shock absorbers could result in dam-
age that could result in you losing control and falling.
ATTENTION: The front set fork must be rotated 180 degrees, or it would be dangerous. When installing
the handlebar, the derailleur dial should be put upward, the cables should be placed in the right place.
When tightening the bolts, the force should be uniform, or it may cause the bolt head to wear.
PROTECTIVE MATERIAL
2.
3.
4.
3