Wilier SLR36GRV Manual De Uso Y Mantenimiento página 10

W I L I E R . C O M
SLR36GRV
Use original spare parts exclusively provided by Wilier
Triestina spa. Any modification or alteration (also
graphic) of the product with non-original spare parts
or spare parts not delivered directly by Wilier Triestina
spa, involves the expiration of the guarantee
SPOKES
3
The spokes used for the assembly of the wheels have
the following sizes and characteristics..
SLR36GRV
Right side
Left side
SPOKES REPLACEMENT
Warning
!
If you have any doubt whatsoever your service-repair
ability, please take your bicycle to a qualified repair
shop.
Before any maintenance operations on your wheels,
always wear gloves and protection glasses.
Use only spokes of the same length and
characteristics of those being replaced. Use original
spare parts exclusively provided by Wilier Triestina
spa.
To replace a spoke is extremely easy in both cases,
front as well as rear wheels (Pic. 7 and Pic. 8).
- Unscrew the nipples from the spokes with the
corresponding spanner.
- Once it has been unscrewed, slide off the spoke
from its own seat.
- Insert the new spoke
- Screw in the nipple with its washer. To avoid a
twisting effect, hold the spoke in place
1 0
To solidify the fit between the spoke and nipple, use a
medium threadlocker.
To ensure the correct spoke tension please follow the
indications below:
- Correct spoke tension for front wheel (disc side)
1000 N
- Correct spoke tension for rear wheel, free wheel
side 1100 N
To evaluate the correct wheel tension, please use
a professional spoke tension gauge, we do not
recommend that spoke tension is estimated manually;
please refer to a professional cycle mechanic if you
do not own a professional spoke tension gauge. The
# L OV E M Y W I L I E R
Rear wheel. Front wheel.
286.5 mm 286.5 mm
288.5 mm 288.5 mm
correct spoke tension is essential to ensure a ridged
and durable wheelset.
Using a tensiometer will ensure compliance with the
set load parameters.
ATTENTION in correct spoke tension, too high or too
low, could lead to wheel failure and resulting serious
or fatal accident.