Wilier SLR36GRV Manual De Uso Y Mantenimiento página 12

W I L I E R . C O M # L OV E M Y W I L I E R
SLR36GRV
III_ INSERTING AN INNER TUBE IN A TUBELESS
TIRE HOOKLESS COMPATIBLE IN THE EVENT OF
A PUNCTURE
The inner tube must have a Presta valve 6mm diameter.
- Deflate the tie.
- Completely deflate the tyre.
- Starting from the opposite side of the valve, unhook
the tyre bead from its seat and continue along the
circumference of the wheel. If required to use a lever
to unhook the tyre beads, use a plastic lever so to not
damage the rim and tape.
- Unscrew the valve nut and remove the valve.
- Drain the puncture prevention liquid from inside the
tyre and rim.
- Insert the inner tube partially inlfated into the tyre.
- Starting from the point opposite the valve, insert the
second tire bead into place and continue along the
entire circumference of the wheel, taking care to not
pinch the inner tube.
- Inflate the inner tube until both tire beads are fitted
properly in the correct position.
1 2