Publicidad
Idiomas disponibles
Idiomas disponibles
INSTRUCTIONS FOR Lithonia Lighting TCC
14. Standard Exit Sign: Slide panel into grooves (See Fig O) and torque bonding screw to 10.6 in-lbs (1.2Nm) . If a double-sided
panel is desired, add panels to both sides. It may simplify installation if you allow the colored diffuser to side into the far
grove ahead of the metal plate. Torque bonding screws on both sides (front and back). Proceed to step 16.
BONDING SCREW
15. Running Man Sign: Place the Running Man sign over the white diffuser and slide stacked signs into the grooves with
Running Man panel facing outward, RM no Arrow panel is shown. If double-sided panel is desired, remove back
plate and add panels to both sides. (See Fig. P)
RM PANEL
PAGE: 10 of 19
LED Steel Combo Emergency Unit
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
TOP/SIDE MOUNT INSTALLATION
SLIDE PANEL
GROOVES
GROOVES
SAVE THESE INSTRUCTIONS
and deliver to owner after installation
Fig. O
DIFFUSER
Fig. P
(CONT.)
Publicidad
