Acuity Brands Lithonia Lighting TCC Manual De Instrucciones página 6

INSTRUCTIONS FOR Lithonia Lighting TCC
LED Steel Combo Emergency Unit
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
BACK MOUNT INSTALLATION
(CONT.)
13. Replace the side cover and torque the side screws to 10.6 in-lbs (1.2Nm) (See Fig F).
SIDE SCREWS
TEST SWITCH
AND LED
Fig. F
14. Energize the unit with AC supply. The charge indicator will illuminate green for charging. Allow battery to charge for 24 hours
before initial testing.
15. Adjust and focus the lighting heads as required.
SAVE THESE INSTRUCTIONS
PAGE: 5 of 19
and deliver to owner after installation