Acuity Brands Lithonia Lighting TCC Manual De Instrucciones página 17

INSTRUCTIONS FOR Lithonia Lighting TCC
14. Replace the side cover and torque the side screws to 10.6 in-lbs (1.2Nm) (See Fig Y).
SIDE SCREWS
15. Energize the unit with AC supply. The charge indicator will illuminate green to indicate the unit is charging. Allow battery to
charge for 24 hours before initial testing.
16. Adjust and focus the lighting heads as required.
PAGE: 16 of 19
LED Steel Combo Emergency Unit
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
PENDANT MOUNT INSTALLATION
(Pendant mount not included)
SAVE THESE INSTRUCTIONS
and deliver to owner after installation
Fig. Y
(CONT.)
TEST SWITCH AND LED