Publicidad
Service & maintenance information
Service and maintenance of a medical device is wholly the responsibility of the owner of that device.
Failure to service and maintain a device in accordance with the instructions may invalidate the
device's warranty. Furthermore, failure to service and maintain a device may compromise the clinical
condition or safety of users and/or their caregivers. Do not perform service and maintenance while
the user is in the device. Contact the local dealer for assistance, if needed, in setting up, using or
performing service and maintenance of the device.
Lifetime
The lifetime of this device in normal use is 8
years if all maintenance and servicing is carried
out in accordance with the manufacturer's
instructions and demonstrably recorded. The
device may be reissued within its lifetime.
Service interval
The
frequency
of
altered depending upon use and wear. It is
recommended that the device is inspected
yearly, every time the device is re-issued for
use and after a long-term storage (more than 4
months). The inspection should be carried out
by a person who understands the use of the
device.
Service checklist:
Check and adjust the following as per their
intended use (if applicable):
• Adjustment options for back, hip and legs
• Back recline, dynamic back and lock of
dynamic
• Nuts, bolts and handles on the device are
tightened
• All fittings and buckles for signs of worn out
parts
• The device for cracks or signs of worn out parts
• All labels on the device are intact.
Repair or replace any damaged or worn out
parts.
Maintenance
Before every use it is recommended to:
wipe off any residue and dirt from the device, using
a cloth with warm water and a mild detergent/soap
without chlorine and let it dry before use. Carry out
a visual inspection, for any damaged or worn-out
parts.
Washing
Main device
This device can be washed at 60° using a mild
detergent for 10 minutes in a washing machine
designed for medical devices. Use the machine's
drying function to dry the device. Unmount all
accessories and wash them separately.
Fabric and covers
The cushion covers can be washed at 60°C
using a mild detergent in a washing machine.
etac.com
inspection
may
be
EN
EN
Separate foam and cover before wash.
Foam
It is not recommended to wash the foam parts.
Handwash
This device and its accessories can also be
washed by hand. Use warm water and a mild
detergent/ soap without chlorine and let all
parts dry before use.
Disinfection
The device can be disinfected with a 70%
disinfectant IPA solution. It is recommended to
wipe off any residue and dirt from the device,
using a cloth with warm water and a mild
detergent/soap without chlorine and let it dry
before disinfection.
Materials
• Stainless steel
• Aluminium
• Plastic
• Rubber
• Polyurethane
• Neoprene
• Ipanema
• Steel
• Zinc alloy
• Brass.
Surface treatment
The following surface treatment processes were
used to protect against corrosion:
• Lacquered surfaces = Polyester powder coating
or ED-coating
• Non-lacquered aluminium parts = Anodized
coating
• Non-lacquered steel surfaces = Galvanized.
75
Publicidad
