Roger Technology B71/PBX Instrucciones Y Advertencias Para El Instalador página 65

ENABLE OFF
UNLOCK --------
MODIFY --------
ENTER ESC
ENABLE ON
UNLOCK 19######
MODIFY ########
ENTER ESC
ENABLE ON
UNLOCK 19011900
MODIFY ########
ESC
ENTER
The factory password is set to 00000000 and it is
equivalent to "protection OFF".
To change the PASSWORD, go to "MODIFY", press ENTER
and proceed with the entry as indicated in the UNLOCK
menu.
WARNING: the password is stored but the parameter
settings remain accessible. After 30 minutes without using
the keys, the protection will be activated automatically
(ENABLE = ON).
The cursor moves on the second digit.
With the plus + and minus - keys the number is increased
from 0 to 9.
And so on until the desired password is completed.
numbers are all at 0.
with the key ESC.
NOTE: if the password entered is correct, instead of
"00000" will appear"-----"
To exit the procedure press key ESC.
ENTER. The unchanged
65