Descargar Imprimir esta página

Roger Technology B71/PBX Instrucciones Y Advertencias Para El Instalador página 75

Ocultar thumbs Ver también para B71/PBX:

Publicidad

Idiomas disponibles

Idiomas disponibles

11.18 Alarms menu
The indicated data is only indicative.
11.18.1
General alarms
GENERAL
BATT.CHARGER
BATTERY
PANEL
ENTER
LINE BLACKOUT
LINE LACK
HIGH VREG
OVER TEMPERATURE
ENTER
LINE BLACKOUT
TOTAL:
STATUS:
COUNTER:
ENTER
LINE BLACKOUT
TOTAL:
STATUS:
-----
COUNTER:
STOP
-----
ENTER
LINE BLACKOUT
TOTAL:
STATUS:
------
RESET
COUNTER:
------
ENTER
ESC
ESC
0
----
RUN
----
ESC
0
ESC
0
ESC
LINE BLACKOUT: Shows the number of blackouts
detected in the mains voltage.
STATUS:
ON: (if no mains power)
OFF: (if there is mains power)
LINE LACK: Shows the voltage surges (gaps) detected.
STATUS:
ON: (voltage hole detected in the last 60 seconds)
OFF: (regular mains voltage)
HIGH VREG: shows the number of overvoltage instances
detected in the internal voltage regulator (used by the
battery charger)
STATUS:
ON: (actual voltage too high)
OFF: (voltage within limits)
OVER TEMPERATURE: Displays the number of over-
temperature instances detected (exceeding the maximum
limit allowed by B71/PBX)
STATUS:
ON: (temperature too high)
OFF: (temperature within limits)
To see/modify the other functions, move onto the one
required (using the
and
same procedure.
STOP: interrupts the count
RESET: resets the count, keeping it at zero
Use the - key to go back in the sequence RESET > STOP
> RUN
RECOMMENDED SETTING: RUN
Return to the previous menu
keys) and repeat the
75

Publicidad

loading