Roger Technology B71/PBX Instrucciones Y Advertencias Para El Instalador página 78

11.18.4
Photovoltaic panels alarms
The indicated data is only indicative.
GENERAL
BATT.CHARGER
BATTERY
PANEL
ENTER
HIGH CURRENT
HIGH VOLTAGE
OFFSET
ENTER
HIGH CURRENT
TOTAL:
STATE:
COUNTER:
ENTER
HIGH CURRENT
TOTAL:
STATE:
STOP
COUNTER:
-----
ENTER
HIGH CURRENT
TOTAL:
STATE:
COUNTER:
RESET
------
ENTER
78
ESC
ESC
0
OFF
RUN
----
ESC
0
OFF
ESC
0
OFF
ESC
HIGH CURRENT: Displays the number of panel current
overloads.
HIGH VOLTAGE: Shows the number of over-voltage
instances detected (*)
(*) The B71/PBX
however the application of a voltage higher than the indicated (wrong choice
of solar panel or wrong connection) limit will damage the board.
OFFSET: Displays the number of calibration errors of
the measurement circuit for the current supplied by the
panels.
To see/modify the other functions, move onto the one
required (using the and
same procedure.
STOP: interrupts the count
RESET: resets the count, keeping it at zero
Return to the previous menu
keys) and repeat the