MSA ALTAIR 4 Manual De Instrucciones página 450

DESCRIPTION
2 Description
2.1 Instrument Overview
9
Figure 2-1
1
2 Safe LED (green)
3 Sensor Inlets
4 Horn
5 [ ] Button
6 [ ] Button
The instrument monitors gases in ambient air and in the workplace.
It is available with a maximum of three sensors, which can display readings
for four separate gases (one Dual Toxic Sensor provides both CO and H
sensing capabilities in a single sensor).
While the instrument can detect up to 25 % oxygen in ambient air,
it is approved for use only up to 21 % oxygen.
The alarm levels for the individual gases are factory-set and can be
changed through the instrument Setup Menu. These changes can also be
made through MSA Link software. Ensure that the latest version of the
MSA Link software has been downloaded from MSA's website
www.msanet.com.
If gas is present during Fresh Air Setup, the instrument will fail
and enters Measure mode.
10
1 2
9
3
4
5
6
7
8
9
Instrument view
Communication
ALTAIR 4 - Operating Manual 10088160/00 Y-HLR
7
[ ] Button
8 Display
9 Alarm LEDs (4)
10 Clip
11 Charging Connection
12 Screws (4)
MSA
10
11
12
S
2
GB