MSA ALTAIR 4 Manual De Instrucciones página 474

OPERATION
3.4.4 Setup Time and Date
This submenu is for setting date and time.
For more information see the flow charts in Section 7.9.
Figure 3-5
(1) To bypass this setup, press the [
as follows.
(2) Press the [
(3) Set month by pressing the [
(4) Press the [
(5) Repeat this procedure for day, year, hours and minutes.
• By default, time is displayed in 12-hour format.
• The
(6) Confirming this screen with the [
• If the sensors have not warmed up yet, the countdown is displayed.
• The instrument then goes to Measuring mode.
3.5 Data Logging
Connecting Instrument to PC
(1) Switch on the device and align the Datalink Communication port on the
device to the IR interface of the PC.
(2) Use the MSA Link software to communicate with the instrument.
See MSA Link documentation for detailed instructions.
34
Date and Time Setup
] button to enter the submenu.
] button to confirm month.
screen will be displayed next.
EXIT
ALTAIR 4 - Operating Manual 10088160/00 Y-HLR
] or [ ] button; otherwise, continue
] button or the [ ] button.
] button exits the instrument setup.
MSA
GB