MSA ALTAIR 4 Manual De Instrucciones página 470

OPERATION
3.4.1 Sensor Setup
Each sensor can be turned on or off.
For more information, see the flow charts in Section 7.6.
COMB/EX
CO
Figure 3-2
(1) To bypass this setup, press the [
as follows.
(2) Press the [
(3) Use the [
] button.
(4) Repeat this procedure for all other sensors.
(5) After setting the last sensor, continue to Calibration Setup.
30
O2
H2S
Sensor Setup
] button to enter the submenu.
] or [ ] button to change the option and confirm with the [
ALTAIR 4 - Operating Manual 10088160/00 Y-HLR
] or [ ] button; otherwise, continue
MSA
GB