Abicor Binzel MF3-Laser Front/Rear Manual De Instrucciones Original página 24

4 Product description
4 Product description
4.1 Assembly and use
Fig. 2
A MF3-Laser Front
B Wire conduit
C MF3-Laser Front
D Wire drum
G
The media required for the welding process (welding current, shielding gas, and coolant) are passed
through the device's media plate and fed to the feeding body. The four-roll drive feeds the welding wire at
a constant wire feeder speed. The wire feeder speed is controlled by a higher-ranking control.
The MF3-Laser Front and the MF3-Laser Rear differ in that there is no wire actual value encoder installed
in the MF3-Laser Rear.
EN - 6
Design
A
F
MF3-Laser Front/Rear
E eBOX
F Robot
G Optics
B
E
C
D