Descargar Imprimir esta página

Abicor Binzel MF3-Laser Front/Rear Manual De Instrucciones Original página 37

Ocultar thumbs Ver también para MF3-Laser Front/Rear:

Publicidad

Idiomas disponibles

Idiomas disponibles

MF3-Laser Front/Rear
11 Disassembly
Risk of injury due to unexpected start
If power is supplied during maintenance, cleaning or disassembly, rotating parts can start running
unexpectedly and lead to injuries from cuts.
► Switch off the device.
► Disconnect all electrical connections.
Loosen the wire guide hose from the device.
1
Remove the parts to be disconnected.
2
Disconnect the front drive from the flex supply.
3
12 Disposal
12.1 Disposal of materials
This product is mainly made of metallic materials that can be melted in steel and iron works and are thus
almost infinitely recyclable. The plastic materials used are labeled in preparation for their sorting and
separation for later recycling.
12.2 Disposal of consumables
Oil, greases and cleaning agents must not contaminate the ground or enter the sewage system. These
substances must be stored, transported and disposed of in suitable containers. Contaminated cleaning tools
(brushes, rags, etc.) must also be disposed of in accordance with the information provided by the
consumables' manufacturer.
► Observe the relevant local regulations and disposal instructions in the safety data sheets specified by
the manufacturer of the consumables.
The disposal of dust collecting bags and disposal bags is subject to special waste regulations. The dust must
not enter sewage systems or be disposed of together with normal household waste.
► Observe the local and official regulations.
12.3 Packaging
ABICOR BINZEL has reduced the transport packaging to the necessary minimum. The ability to recycle
packaging materials is always considered during their selection.
CAUTION
Equipment marked with this symbol is covered by European Directive 2012/19/EU on
waste electrical and electronic equipment (WEEE).
► Do not dispose of electrical and electronic equipment with household waste.
► Disassemble electrical equipment prior to proper disposal.
 11 Disassembly on page EN-19
► Collect components of electrical separately and recycle in an environmentally
responsible manner.
► Observe local regulations, laws, provisions, standards and guidelines.
► Please consult your local authority for information about collection and return of
electrical devices.
11 Disassembly
EN - 19

Publicidad

loading