Publicidad
Idiomas disponibles
Idiomas disponibles
MF3-Laser Front/Rear
6.1 Mounting the drive
Position the device on the media plate.
1
Pay attention to the position of the dowel pins in
2
relation to the holes.
Lock the device and the media plate with the
3
media plate's quick-release clamps.
Turn the lug on the tension lock clockwise by at
4
least 180°.
Before connecting the wire feeder to the wire
5
guide hose, check whether the proper wire guide
(liner or PA liner) has been inserted in accordance
with the wire diameter and wire type.
Insert the control lead, flex supply, and wire guide
6
hose into the appropriate connectors one after the
other.
6 Commissioning
EN - 11
Publicidad
