Publicidad
Idiomas disponibles
Idiomas disponibles
7 Operation
7.3 Inserting the welding wire
Risk of injury from pointed welding wire
If the pointed welding wire is fed, severe puncture injuries may result.
► Do not look directly into the opening of the contact tip to check the wire feed.
► Keep your face and limbs at a safe distance from the wire guide.
EN - 14
WARNING
MF3-Laser Front/Rear
Open the housing cover at the lug and lift the
1
cover up.
Push the clamping lever up to release the latch.
2
Swivel the rocker arm to the side.
3
Check wire guides for dirt and abrasion and, if
4
necessary, blow them out with compressed air or
replace them.
Thread the wire into the feeder side, manually or
5
with the assistance of the rear wire feeder.
Make sure that the welding wire is guided
correctly through the wire guides on the device.
Close the rocker arm.
6
Publicidad
