Clean Function - Main And Mini Oven - Siemens HB 56 N.50B Instrucciones De Uso

Cleaning the oven floor
Cleaning the glass cover
for the oven light
Cleaning function
Caution
Cleaning levels
40
Use hot soapy water or a vinegar solution.
It is best to use oven cleaner if the oven is very dirty.
Only use oven cleaner in a cold oven.
Never use oven cleaner on the self-cleaning surfaces
of the oven.
Note:
Enamel is baked on at very high temperatures. This
can cause some slight colour variation. This is
normal and does not affect the function. Do not use
coarse scouring pads or strong cleaning agents to
remove such discolorations.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
Anti-corrosion protection is guaranteed.
It is best to clean the glass cover with washing-up
liquid.
The cleaning function is a regeneration program. If
the self-cleaning components of the oven are no
longer cleaning themselves sufficiently, they can be
regenerated using this function. They are then fully
operational again.
Remove accessories and ovenware from the oven.
Firstly, you must clean the oven surfaces which are
not self-cleaning. Otherwise stains may appear that
cannot be removed.
You can set various cleaning levels, depending on
how dirty the self-cleaning components are.
Cleaning levels:
3 = 1 hour 15 minutes
2 = 1 hour
1 = 45 minutes.