Seal; Accessories; Troubleshooting - Siemens HB 56 N.50B Instrucciones De Uso

Seal

Accessories

Troubleshooting

Problem
The oven does not work.
The clock display flashes.
A „5" appears in the
display.
The „Er 1" or „Er 4" error
message appears in the clock has failed.
display.
The „Er 11" error message
appears in the clock display.
44
Clean the seal on the oven with washing-up liquid.
Never use caustic or abrasive detergents.
Immediately after use, soak the accessories in
washing-up liquid. Food residues can then be easily
removed with a brush or sponge.
Should a malfunction occur, it is often only due to a
minor fault. Please read the following instructions
before calling the after-sales service:
Possible cause
Blown fuse
Power cut
The automatic time limiter
was activated.
The temperature sensor
A button has been
pressed for too long or
a button has jammed.
Repairs may only be carried out by fully trained
after-sales service technicians.
Improper repairs may constitute serious hazards to
the user.
Comments/remedy
Look in the fuse box and check that
the fuse is in working order.
Reset the time.
Switch off the function selector.
Contact the after-sales service.
Press all buttons separately. If the error
message remains, please contact the
after-sales service.