Ivoclar Vivadent PrograPrint PR5 Guía Breve página 9

No. Working area Tasks / Work
1 Hood – Access to the build chamber
– Mounting the build platform
and cartridge
– Cleaning of the build
chamber with the printer
switched off
2 Build platform Creation of the printed objects
3 Cartridge Material supply for print jobs
4 Material bottle Material supply for print jobs
Type of hazard Safety equipment
Mechanical hazards – Safety lock of the hood. Access to
– The printer does not start with the
– Cushioning of the hood against
Premature polymerization of the – Acoustic signal (Close hood)
material in the cartridge due to
– Tinted window
incident light.
Contamination of the material.
Mechanical hazards by the build – Construction-safe design
platform falling down
– Fixation lever
Leaking, slopping over material due
to the build platform falling down
into the filled cartridge
Leaking, slopping over material – Handle at the bottom section, not
during transport of the cartridge.
Dripping build platform – Accidental swivelling impeded by
Wrap around rim at the top edge
Leaking, slopping over material – Robust design of the material
during transport, opening or
handling of the bottle
– Material bottle can be held stable
Protective effect
Protection against crushing
the build chamber is not possible
while the build platform is moving.
hood open.
slamming shut
– Protection against damage
– Protection of the material
Protection against crushing
– Protection against health
– Protection against
– Protection against health
the top section
– Protection against
the handle at the bottom section
– Protection against health
bottle
– Protection against
and does not give in to pressure
to the printer
impairments
environmental damage
impairments
environmental damage
impairments
environmental damage
9