Descargar Imprimir esta página

medi Genumedi pro ROM Instrucciones De Uso página 5

Ocultar thumbs Ver también para Genumedi pro ROM:

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 8
• Close both of the straps (Fig. 6).
• Then check the bandage's position again.
• To remove the bandage, first open both straps. Then grasp the inside of
the bottom end of the bandage and pull it downwards and off (Fig. 7).
Care instructions
The silicone ring is not supposed to be removed when washing the brace.
Please close the hook and loop fasteners before washing and remove the
splint (Fig. 1). We recommend using a laundry bag. Fabric softener, fats,
oils and ointments can attack the material and the Clima Comfort Effect
can be impaired. Soap residues can cause skin irritation and material
wear.
• Wash the product by hand, preferably using a medi clean detergent,
or in delicate cycle at 30°C using a mild detergent without fabric
conditioners.
• Do not bleach.
• Leave to dry naturally.
• Do not iron.
• Do not dry clean.
    
Storage instructions
Keep the product in a dry place and do not expose to direct sunlight.
Material composition
Polyamide, polyester, elastane, viscose, aluminum
Liability
The manufacturer's liability will become void if the product is not used as
intended. Please also refer to the corresponding safety information and
instructions in this manual.
Disposal
The product can be disposed of in the domestic waste.
Your medi Team
Wishes you a rapid recovery!
In the event of any complaints regarding the product such as damage
to the fabric or a fault in the fit, please report to your specialist medical
retailer directly. Only serious incidents which could lead to a significant
deterioration in health or to death are to be reported to the manufacturer
or the relevant authorities in the EU member state. The criteria for serious
incidents are defined in Section 2, No. 65 of the Regulation (EU) 2017/745
(MDR). The traceability of this product is assured via a UDI code
English
.

Publicidad

loading