SCHUBERTH S3 Manual página 88

G. MAINTENANCE AND CARE
2. Push it up and to the front side until the
ventilation hood is released from the helmet
shell
3. After cleaning, attach the ventilation hood
by placing it on the bracket and pushing it
downward under slight pressure until it clicks
into place.
4. To ensure optimum ventilation, operate the
ventilation slide.
5. RETENTION SYSTEM
The components of the retention system do not require maintenance.
6. STORING THE HELMET
Store the helmet in the helmet bag supplied in a dry, well-ventilated and stable
place. Always position the helmet so that it cannot fall to the floor. Damage that
occurs in this way is not covered by the warranty.
Note:
Store the helmet out of the reach of children and animals.
88