SCHUBERTH S3 Manual página 59

C. THE HELMET
7. ADDITIONAL WIND DEFLECTOR
The additional wind deflector prevents the unpleasant effect of the wind
created as you ride flowing into the helmet. In addition, the riding noise in the
helmet is reduced.
The wind deflector is attached by velcro strips
on the inside of the acoustic collar and can be
removed when required to provide an additional
flow of fresh air, especially in hot weather.
Tip:
The fit of the bottom of the helmet is extremely important in ensuring
that the helmet is as quiet as possible. If you have a smaller neck size, we
recommend that you also wear a scarf.
8. CHINSTRAP WITH MICRO-LOCK RATCHET FASTENERS
The S3 is fitted with a ratchet strap. This locking
system is easy to use and enables you to adjust the
chinstrap perfectly to your head every time you put the
helmet on.
ADJUSTING THE CHINSTRAP
The length of the chinstrap is adjusted by increasing or reducing the length of
strap pulled through the metal buckles. Adjust the length of the chinstrap so
that it fits firmly but comfortably under your chin.
EN
59