Argo X3I ECO PLUS 27 HL WF Manual De Instalacion Y Uso página 67

 Do not spill water on the remote controller, otherwise the remote
controller may be broken.
 When below phenomenon occurs, please turn off air conditioner and
disconnect power immediately, and then contact the dealer or qualified
professionals for service.
 Power cord is overheating or damaged.
 There's abnormal sound during operation.
 Circuit breaker trips off frequently.
 Air conditioner gives off burning smell.
 Indoor unit is leaking.
 If the air conditioner operates under abnormal conditions, malfunctions,
electric shocks or fire hazards may occur.
 When turning the unit on or off using the auxiliary button, press this
switch with an insulating object made of a material other than metal.
 Do not climb or place heavy objects on the top panel of the outdoor
unit. Otherwise, you risk damage or personal injury.
Appendices
 Installation must be performed by qualified professionals. Otherwise,
you risk damage or personal injury. Electrical safety regulations must
be observed when installing the unit.
 According to the local safety regulations, use qualified power supply
circuit and circuit breaker.
 Always install the power switch. Otherwise, malfunctions may occur.
An omnipolar disconnector with contact separation of at least 3 mm in
all poles must be connected in the fixed wiring.
 Insert a power switch with sufficient power. Circuit breaker should be
included magnet buckle and heating buckle function. It can protect the
overload and circuit-short.
 Air conditioner should be properly grounded. Incorrect grounding may
cause electric shock.
 The yellow-green wire in air conditioner is grounding wire, which can't
be used for other purposes.
 Don't use unqualified power cord.
67