Argo X3I ECO PLUS 27 HL WF Manual De Instalacion Y Uso página 82

WIRE CONTROL OR PORTABLE
AIR CONDITIONER (CONTROL
PANEL RESET)
Press the button on the touch panel.
With the unit off, press and hold
the "Wifi" button for 10 seconds.
When the unit beeps, it means the
reset has been successful.
NB: The configuration must be
done within 2 minutes. If it does not
happen within 2 minutes, repeat
the reset operation.
Alternatively, after setting and resetting the air conditioner, click on
to select the Wi-Fi network to associate. Select the desired network and continue the configuration.
REMOTE CONTROL WITH WIFI
BUTTON
Direct the remote control towards
the unit.
With the remote control off, press
the "Mode" + "Wifi" buttons
simultaneously for 1 second. When
the unit beeps, it means that the
reset has been successful.
NB: The configuration must be done
within 2 minutes. If it does not
happen within 2 minutes, repeat the
reset operation.
82
REMOTE CONTROL WITHOUT
WIFI BUTTON (MODE and
TURBO)
Direct the remote control towards
the unit.
Press the "Mode" + "Turbo" buttons
simultaneously for 10 seconds.
After the unit has twice produced
an acoustic signal, this will mean
that the reset has been successful.
NB: The configuration must be done
within 2 minutes. If it does not
happen within 2 minutes, repeat the
reset operation
Add appliance manually
in the upper right corner