Operating guide
1. When you connect the power, press the "ON/OFF" button on the remote control to turn the air conditioner
on.
2. Press the MODE button to select the desired operating mode: AUTO, COOL, DRY, FAN or HEAT.
3. Press "▲" or "▼" to adjust the desired temperature. (The temperature cannot be adjusted in automatic
mode.)
4. Press the "FAN" button to set the desired fan speed: automatic, low, medium or high.
5. Press the "SWING" button to adjust the fan's angle of airflow.
Replacing the remote control batteries
1.
Remove the battery compartment cover, marked with
(see image to right), by sliding it in the direction of
the arrow.
2.
Use only two AAA – LR03 1.5V batteries. Make sure the
+ and – ends are facing the correct direction.
3.
Slide the battery compartment cover back into place.
N.B.:
When the unit is operating, point the remote control's signal transmitter at the indoor unit's receiver.
The distance between the transmitter and the receiver must not exceed 8 metres and should remain free of
obstacles.
If the room contains a fluorescent light or cordless telephone, signal interference is likely to occur.
When the remote control is not used for a month or more, remove the batteries.
Use batteries of the same type when replacing the batteries, as necessary.
If the icons on the remote control display are blurred or not visible, replace the batteries.
Do not attempt to recharge the batteries. Replace both batteries at the same time.
Do not throw batteries into fire; they may explode.
INFORMATION FOR CORRECT DISPOSAL OF BATTERIES IN ACCORDANCE WITH EUROPEAN DIRECTIVE 2006/66 /
EC and AMENDMENTS INTRODUCED BY DIRECTIVE 2013/56 / EU
Please replace the battery when its electric charge is exhausted: at the end of its useful life this battery must not be disposed of with unsorted
waste. It must be delivered to appropriate separate collection centers or to retailers that provide this service. Disposing of a battery separately
allows you to avoid possible negative effects on the environment and human health resulting from inappropriate disposal and allows you
to recover and recycle the materials it is made of, with important savings in energy and resources. To emphasize the obligation to dispose
of the batteries separately, the symbol of the crossed out bin is shown on the battery. Illegal disposal of the product by the user involves the
application of administrative penalties provided for by current legislation.
78
signal sender
battery
reinstall
remove
Cover of battery box