Argo X3I ECO PLUS 27 HL WF Manual De Instalacion Y Uso página 68

 Unstable power supply or incorrect wiring may result in electric shock,
fire hazard or malfunction. Please install proper power supply cables
before using the air conditioner.
 Correctly connect the phase, neutral and ground wires of the power
outlet.
 Be sure to disconnect the power supply before proceeding with any
work relating to the electrical circuit and safety.
 Do not put through the power before finishing installation.
 If the power cord is damaged, it must be replaced by the manufacturer,
its service agent or similarly qualified persons in order to avoid danger.
 The temperature of refrigerant circuit will be high, please keep the
interconnection cable away from the copper tube.
 The appliance must be installed in accordance with national wiring
regulations.
 The air conditioner is the first class electric appliance. It must be
properly grounder with specialized grounding device by a
professional. Please make sure it is always grounded effectively,
otherwise it may cause electric shock.
 The ground resistance must comply with national electrical safety
standards.
 The appliance must be positioned so that the plug is accessible.
 All wires of indoor and outdoor units must be connected by a
professional.
 If the length of power connection wire is insufficient, please contact the
supplier for a new one. Do not make extensions yourself.
 For the air conditioner with plug, the plug should be reachable after
finishing installation.
 For the air conditioner without plug, a circuit breaker must be installed
in the line.
 If you need to move the air conditioner to another location, contact
qualified personnel. Otherwise, you risk damage or personal injury.
 Choose a location out of the reach of children and away from animals
or plants. If this is not possible, install a safety fence.
 The indoor unit should be installed close to the wall.
68