Argo X3I ECO PLUS 27 HL WF Manual De Instalacion Y Uso página 71

GUIDE TO THE REMOTE CONTROL AND DISPLAY
Remote control buttons and display icons
Getting to know the remote control buttons
When you connect the power, the air conditioner will emit a beep. The power indicator
You will now be able to control the air conditioner with the remote control.
 With unit on, when you press the ON/OFF button on the remote control, the
display will flash once and the air conditioner will emit a beep. This means that the signal has been sent to the
unit. When the unit is on, the icons for the set functions will appear on the display.
 This remote control can control the temperature in Auto mode.
 If the air conditioner is equipped with WIFI or wired control, you must first control the unit in Auto mode with the
standard remote control and then you can connect it to the app and set the temperature in Auto mode via smart-
phone or wired control.

If the remote control is combined with a unit that can't control the temperature in Auto mode, the temperature set
in this mode may not be valid or the temperature shown on the unit display may not match that shown on the
remote control's display in Auto mode.
71
will illuminate (red).
icon on the remote control