3/ PROTECTING THE ENVIRONMENT - ECODESIGN
Spare parts for our appliances are available for 11 years.
information, contact your EuroCave stockist. For France, contact our
customer service department. Contact details at www.eurocave.com
Disposal of packaging
All packaging used by EuroCave is made from recyclable
materials (except the expanded polystyrene high density
base and the lower hinge protector). After unpacking
your cabinet, take the packaging to a refuse collection
point. For the most part, it will be recycled.
Recycling: a caring gesture
Electrical and electronic equipment can have a harmful effect on the
environment and human health owing to the presence of hazardous
substances.
You should never therefore trash electronic and electrical equipment with
unsorted municipal waste.
When purchasing a new EuroCave product, you can entrust recycling of
your old appliance to your EuroCave retailer.
Unpacking
•
When your cabinet is delivered, check the outside for signs of damage
(impact, warping...).
•
Open the door and check that the various elements inside are intact
(walls, Main du Sommelier supports, hinges, bottle support...).
•
Remove the protective elements found inside and outside your cabinet
including the lower hinge protector (see diagram (1))
•
Fit the cap (see diagram 2), found in the accessories bag, used for sealing
the hole in the lower hinge.
•
Protective wedges for transportation have been attached to each shelf.
2 wedges per shelf (Picture 1). Remove all of them using a rotating
2/ POWER SUPPLY
The wine cabinet's power lead has a plug, to be plugged into a standard earthed outlet to prevent
any risk of electric shock.
Have the power supply socket checked by a qualified electrician who will check that it is
correctly earthed and will carry out, if necessary, work to ensure that the socket
complies with current standards.
Contact your usual EuroCave retailer to change the power lead if it is damaged. It must be replaced
by a EuroCave original manufacturer's part.
If you are moving to a foreign country, check that the supply characteristics of the cabinet
correspond to the country (voltage, frequency).
For further
4/ INSTALLING YOUR WINE CABINET
1
2
Speak to your EuroCave retailer.
collection arrangements set up in the EuroCave network.
In compliance with legislation relating to protecting and caring for the
environment, your wine cabinet does not contain C.F.C.s or H.C.F.Cs.
To save energy
•Install your wine cabinet in a suitable location (see following page) and
observe the recommended temperature ranges.
• Keep the door open for as short a time as possible.
• Ensure that the door seal is in good working order and that it is not
damaged. If it is, contact your EuroCave retailer.
• We recommend that you fill your wine cabinet to at least 75% of its
total capacity.
Disable any unusable appliances by unplugging them and cutting off the
power lead.
movement (Picture 2). You can retain these wedges and reuse them if
you have to transport your wine cabinet over a long distance.
Picture 1
Stainless steel door finish
•
Unpacking the cabinet : Your appliance is protected by a self-adhesive film.
•
Caution : Unpeel the film by hand, never use tools that could scratch or
gouge the surface.
If there is a problem, contact your EuroCave retailer
He will explain the removal and
Picture 2
7
GB