Cleaning The Air Filter; Storing The Clipping Machine; Malfunctions And Repairs; Introduction - Heiniger DELTA3 Manual De Instrucciones

4.4 Cleaning the air filter

The air filter is located on the upper side of the motor section of the machine. The air filter
can be removed from the machine for cleaning (Fig. 11). Regular cleaning of the element
with a dry brush or paint brush is essential. Take care that no foreign bodies get into the
machine while cleaning the air filter.
Fig. 11 + 12
The machine must never be operated without the air filter!

4.5 Storing the clipping machine

Only store the clipping machine in a dry place and in the supplied case. Do not switch on
the machine if you suspect that liquid has got into it. There would then be a risk of electric
shock or a short circuit. Send the clipping machine to a service centre.
Make a habit of always storing the machine between use in its storage case in a well-
cleaned and oiled condition and with the tension on the clipper system slackened off, in a
cool dry place out of the reach of children.
Fig. 13

5 Malfunctions and repairs

This product has been developed and assembled using the best individual components
available. It is designed to give longevity and high performance. If spare parts are used
during the life of this product, please ensure that they are genuine Heiniger parts. Failure
to use genuine Heiniger spares may reduce the performance of this precision engineered
product and will void any warranty claim.

5.1 Introduction

The measures to be taken to rectify such malfunctions are indicated in the "Rectification"
column of the malfunction list. Rectification work shown against a dark background may only
be carried out by an authorised service centre.
The details of authorised service centres can be found in the «Contact addresses» section.

5.2 Malfunction lists

Contact an authorised service centre in the event of malfunctions that are not listed in these
instructions.
10 Instruction manual DELTA3