Design And Function; Scope Of Delivery; Transport, Packaging And Storage - WIKA DG-10 Manual De Instrucciones

Ocultar thumbs Ver también para DG-10:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. Design and function / 5. Transport, packaging and storage

4. Design and function

4.1 Description
The prevailing pressure is measured at the sensor element through the deformation of a diaphragm. By
supplying power, this deformation of the diaphragm is converted into an electrical signal. This signal is
displayed via a digital indicator.

4.2 Scope of delivery

Cross-check scope of delivery with delivery note.

5. Transport, packaging and storage

5.1 Transport
Check the digital pressure gauge for any damage that may have been caused by transport.
Obvious damage must be reported immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during transport (e.g. change in installation
site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage:
Storage temperature: -20 ... +70 °C
Humidity: < 90 % rel., non-condensing
WARNING!
Before storing the digital pressure gauge (following operation), remove any residual media.
This is of particular importance if the medium is hazardous to health, e.g. caustic, toxic,
carcinogenic, radioactive, etc..
WIKA operating instructions digital pressure gauge, model DG-10
GB
13

Publicidad

Tabla de contenido
loading

Tabla de contenido