RedMax GZ360 Manual De Usuario página 42

Kickback and guide bar nose radius
For sprocket nose bars the nose radius is dened by the number of teeth (e.g. 10T). For solid bars the nose radius is
dened by the size of the nose radius. For a given guide bar length, you may use a guide bar with smaller nose radius
than listed.
Guide bar
Length, inch Pitch, inch
14
3/8
16
Low kickback saw chain
A sawchain designated Low Kickback Sawchain, meets the low kickback requirement specied in ANSI B175.1-2012
and CSA Z62.3-11 (R2016).
Filing equipment and ling angles
Using RedMax le gauge will give you the correct ling angles. We recommend always using a RedMax le gauge to
restore the sharpness of the saw chain. The part numbers are given in the table below.
If you are not sure of how to identify what saw chain you have on your chain saw, please visit www.redmax.com for more
information.
H37
5/32
42 – English
MAINTENANCE
Gauge, inch
0.050
591 06 47-01
Saw chain
Max. nose
Type
radius
9T RedMax H37
Drive link count Low kickback
52
56
80
Yes