Warning Symbols; Machine Symbols - Garland MONTANA 110J-V16 Manual De Instrucciones

3. WARNING SYMBOLS

The warning labels indicate required information for
the use of the machine.
This icon indicates instructions which
must be followed to prevent accidents
that could result in serious bodily harm
or death.
operator who follows a safety integration system for
the carefully planned job, only use this chainsaw for
the pruning of trees under these specific conditions.
For the rest of operations, this chainsaw is designed
to be used with two hands in the same way as with a
conventional saw. Please read the instruction manual
carefully.
It is necessary to carefully read
this user instruction manual
before using the machine.
You must wear adequate protection for
the ears, eyes, and head.
Use adequate protection for the feet, legs,
hands, and forearms.
Risk of the chainsaw bouncing.
Warning and Caution.
Hot Surface! Burn risk.
Warning! This chainsaw is a
special product, specifically
designed for the pruning of
trees. This chainsaw may
be used only by a qualified

4. MACHINE SYMBOLS

In order to guarantee safe and proper use and
maintenance of the machine, the following symbols
appear on the machine.
Fuel tank. It is located in the fuel tank cap.
MIXTURE of oil 2 times and gasoline.
The chain´s oil tank. Located in the chain's
oil tank cap.
Start to switch positions that are found on the right
side of the machine:
"O" = Off (The machine does not work)
"I" = On (The machine is ready for use)
Air positions:
Pull the air button to close off air flow.
Push the air button to open the air flow.
Found on the lateral right of the machine.
Carburetor adjustment screws:
"H" = High speed adjustment screw.
"L"= Low speed adjustment screw.
"T" = Idle adjustment screw.
Positions of the White Arrow chain brake
= brake not activated (normal operating
position) Black Arrow = brake on.
Installation direction of the cutting chain
indicator.
Never use only gasoline or poor quality
gasoline! Mix unleaded gasoline 95 °
and a synthetic oil for 2-stroke motors at
2.5% (40:1).
41/160
Adjustment of the chain's oil flow.
English