Janome 385.8080200 Manual De Instrucciones página 60

[] Depress thefootcontrol tosewa buttonhoie.
Themachine will s ewa buttonhole inthefollowing
order:
(1) Step 1and2:Front b artack andleftrow
@)Starting P oint
(2)Step 3:Right r ow
(3) Step 4:Back bartack a nd locking s titches a tthe
h
end
O End point
(4) LED shows each sewing step and a dot will blink
when the buttonhole is finished.
Dot
[]
(_)
(2)
(3)
(4)
(
(
@
1
t
t
ml
If you select the other pattern without raising the foot,
the LED display shows "UP" to warn you.
You can sew another layer of the buttonhole over the
previous stitching (see page 50).
[] Remove the fabric and place a pin just before the
bartack at each end to prevent cutting bartacks.
Cut the opening with the seam ripper. Use an awl
to open the keyhole buttonhole.
@ Pin
(_) Seam ripper
(_ Awl
[] 06 07
O8
n
[] After the buttonhole sewing is finished, push the
buttonhole lever upward as far as it will go.
@ Buttonhole lever
[]
48