Tabla de contenido
Publicidad
Troubleshooting
Condition
The needlethread
1.
breaks.
2.
The bobbin thread
breaks.
The needle breaks.
Skipped stitches
Seam puckering
"The cloth is not
feeding smoothly.
Stitches form loops
below the works.
The machine does not
work.
Buttonhole sewing is
not sewn properly.
The machine does not
run smoothly and is
_noisy.
Cause
The needle thread is not threaded properly.
The needle thread tension is too tight.
3. The needle is bent or blunt.
4. The needle is incorrectly
inserted.
5. The needle thread and the bobbin thread are not set under the
presser foot when start sewing.
6. The thread were not drawn to the rear after sewing.
7. The thread is either too hea W or too fine for the needle.
1. The bobbin thread is not threaded
properly in the bobbin holder.
2. Lint has collected
in the bobbin holder.
3. The bobbin is damaged and doesn't turn smoothly_
1. The needle is incorrectly inserted.
2. The needle clamp screw is loose.
3. The threads were not drawn to the rear after sewing.
4. The needle is too fine for the fabric being used.
1. The needle is incorrectly inserted, bent or blunt.
2. The needle and/or threads are not suit'__blefor the work being
sewn.
3. A Blue Tip needle is not being used for sewing stretch, very
fine fabrics and synthetics.
4. The needle thread is not threaded
properly.
5. A poor quality needle is used.
1. The
2. The
3. The
4. The
needle thread tension is too tight.
needle thread is not threaded
properly.
needle is too heavy for the fabric being sewn.
stitche length is too long for the fabric.
1. The feed dog is packed with lint.
2. The stitches are too fine.
3. The feed dog is not raised after "drop feed" sewing.
1. The needle thread tension is too loose.
2. The needle is either too heavy or too fine for the thread.
1. The machine is not plugged in.
2. Thread has been caught in the hook race.
3. The bobbin winder spindle is not returned to the left after bobbin
winding.
1. The stitch density is not suitable for the fabric being sewn.
2. Suitable interface material has not been used for the stretch
or syr_thetic fabric.
1. Thread has been caught in the hook race.
2. Lint has built up in the hook race or bobbin holder.
For customer assistance call or e-mail:
1-877-SEWING-U (1-877-739-4648)
9 am - 4:3Opm, CST, Monday - Friday
cust-rel @janome-america.com
Reference
See page 24
See page 16
See pag e 18
See page18
See page 26,28
See page 28
See page 18
See page 22
See page 78
Exchange
bobbin,
See page 18
See page 18
See page 28
See page 18
See page 18
See page 18
See page 18
See page24
Changetheneedle.
See page 16
See page 24
See page 18
Makethestitchcoarser
See page 78
Makethestitchcoarser
See page 14
See page 16
See page 18
See page 8
See page 78
See page 20
See page 50
See page 18
See page 78
See page 78
83
Publicidad
Tabla de contenido
