Publicidad
Idiomas disponibles
Idiomas disponibles
English / USA
Starting / Stopping
the Engine
7
3
2
1
Controls
Throttle trigger interlock (1)
Throttle trigger (2)
Slide control (3)
Positions of Slide Control
STOP-O (4) – engine off – the ignition is
switched off
# – normal run position (5) – the engine
is running or can start
START (6) - the ignition is switched on,
the engine can start
20
Symbol on slide control
h (7) – stop symbol and arrow – to stop
4
the engine, push the slide control in
direction of the arrow on the stop symbol
(h ) to STOP-O.
5
Starting
6
:
Hold down the throttle trigger
interlock and squeeze the throttle
trigger.
:
While holding both levers in this
position, move the slide control to
START and hold it there.
:
Now release the throttle trigger,
slide control and trigger interlock in
that order. This is the starting
throttle position.
8
9
:
Set the choke lever (8):
g
For cold start to
For warm start to e
– also use this position if the engine
has been running but is still cold.
:
Press fuel pump bulb (9) at least five
times even if bulb is filled with fuel.
8
FC 75
Publicidad
