Publicidad
Idiomas disponibles
Idiomas disponibles
Replacing the Edger Blade
1
A
B
C
A bent or cracked blade must not be
straightened or welded – it may shatter.
Such blades must be replaced – see
"Fitting the Edger Blade".
STIHL recommends you use only
genuine STIHL edger blades – see
"Special Accessories".
:
Replace the blade (1) when its
length (A) is no longer sufficient to
maintain the necessary ground
clearance (B) and obtain the
required depth of cut (C).
To avoid out-of-balance:
check blade on a STIHL balancer –
see "Special Accessories".
Do not resharpen the blade!
FC 75
English / USA
31
Publicidad
