Publicidad
Idiomas disponibles
Idiomas disponibles
English / USA
Replacing the Depth Wheel
2
Have worn depth wheel replaced by
your STIHL dealer.
:
The end of the thread on screw (1)
is caulked to ensure that the
wingnut (2) does not work loose
and be lost.
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case the screw
and wingnut should be replaced by your
dealer*.
*
STIHL recommends that this work
be done by a STIHL servicing dealer
30
Replacing the Skirt
1
1
Removing the skirt
:
Release and remove screw (1)
along with washer (2).
:
Pull the skirt (3) off the lug (4) and
out of the deflector
Position of skirt
:
Position the skirt (3) correctly in
relation to depth wheel (5):
If wheel is on left, the skirt must
project to the right.
3
2
4
5
3
3
4
Fitting the skirt
:
Push the skirt (3) into the slot in the
deflector until it can be engaged on
the lug (4).
:
Fit the washer on the screw.
:
Insert screw and tighten it down
firmly.
FC 75
Publicidad
