Publicidad
support@nextlevelracing.com
19
Align the Plastic Caps with the Bolt cut-outs on the Frame Members and press them on to fit.
EXTENDED HOTAS MOUNT INSTALLATION
(RECOMMENDED FOR EXTENDED HOTAS STICKS)
A)
B)
20
A) Align the mounting holes on the HOTAS Extension Mount with the mounting holes on the Safety Step.
B) Bolt through and secure with 4 x M8 Bolts, Washers and Flange Nuts.
2
1
ISO View
21
1) Bolt through the HOTAS Plate and secure with 4 x M8 Bolts and Flange Nuts 2) Align the HOTAS Plate Assembly
with the mounting holes on the HOTAS Extension Adjustment Bracket and secure with 4 x M8 Flange Nuts.
PARTS:
• • 2 x Plastic Caps
PARTS:
• • 1 x HOTAS Extension Mount
• • 4 x M8 20mm Sockethead Bolts
• • 4 x M8 Washers
• • 4 x M8 Flange Nuts
PARTS:
• • 1 x HOTAS Extension Adjustment
Bracket
• • 1 x HOTAS Plate
• • 4 x M8 16mm Countersunk Bolts
Side View
• • 8 x M8 Flange Nuts
18
22
Align the mounting slots on the HOTAS Extension Adjustment Bracket assembly with the threaded
inserts on the HOTAS Extension Mount. Bolt through and secure with 4 x M8 Bolts and Washers.
HOTAS EXTENSION MOUNT ADJUSTMENT
23
Loosen the Bolts securing the HOTAS Plate assembly to the HOTAS Extension Mount. Adjust to the
desired height and tighten to secure.
HOTAS MOUNT INSTALLATION
(RECOMMENDED FOR REGULAR HOTAS STICKS)
A)
B)
24
A) Uninstall the Seat Bottom Cushion. Align the mounting holes on the Centre Pole Mount with the mounting holes on the H-Frame.
B) Bolt through and secure with 2 x M8 Bolts, Washers and Flange Nuts.
19
Video Instruction: bit.ly/nlrbuild
PARTS:
• • 4 x M8 16mm Sockethead Bolts
• • 4 x M8 Washers
PARTS:
• • NIL
PARTS:
• • 1 x Centre Pole Mount
• • 2 x M8 60mm Sockethead Bolts
• • 2 x M8 Washers
• • 2 x M8 Flange Nuts
Publicidad
